STEP 1: Prepare and Disinfect the Sampling Area

Lay out all kit components. Disinfect the fingertip with the alcohol swab and let it dry.

STEP 2: Perform a Fingerstick

Use the sterile lancet to puncture the side of the fingertip. Gently massage the finger to form a blood drop.

​

STEP 3: Remove the first droplet of blood

Wipe away the first drop of blood with a clean tissue or sterile gauze before collecting the sample. This ensures accuracy and prevents contamination. 

STEP 4: Collect exactly 30 µL of blood

Use the pipette with the black mark and hold the top part while collecting the blood.

Important: Ensure the blood sample is collected properly.

​

Important

Handle the pipette gently. Use only the top part when drawing up or releasing liquid.

Avoid squeezing too hard to ensure accurate volume and prevent air bubbles.

The blood should be collected up to the black line on the pipette.

STEP 5: Transfer Blood into Buffer

Gently press only the top of the pipette to release the entire blood sample into the buffer tube for proper mixing.

STEP 6: Mix the blood with the buffer

Shake 5–10 times to ensure proper mixing.

STEP 7: Collect the mixed blood and buffer solution

Using a new pipette with two air bubbles, collect the blood mixed with buffer. Press only the top part of the pipette gently. Fill up to the marked line.

STEP 8: Prepare the test cassette

Transfer the full volume from the pipette into the test cassette.

STEP 10: Insert the test cassette halfway into the reader

Insert the test cassette halfway into the reader to enable QR code scanning. Wait until the reader completes the scan and the green indicator light turns on.

​

STEP 9: Start using the device

Turn on the device using the power button located underneath.

Once the device is on, press “New Measurement” and enter the required data to begin the test.

STEP 11: Insert the test cassette fully

Once the indicator light turns green, insert the test cassette completely to start the measurement.

​

STEP 12: Wait 15 minutes

​

Your result is ready

Scan QR for quick results on your phone in PDF form

Or print the result with a mini printer