STEP 1: Prepare and Disinfect the Sampling Area

Lay out all kit components. Disinfect the fingertip with the alcohol swab and let it dry.

Warm hands make blood sampling easier! Allow the test subject to warm their hands beforehand with a warm cloth, warm water, or by gently rubbing their hands together.

STEP 2: Perform a Fingerstick

Use the sterile lancet to puncture the side of the fingertip. Gently massage the finger to form a blood drop.

​

STEP 3: Remove the first droplet of blood

Wipe away the first drop of blood with a sterile swab before collecting the sample. This ensures accuracy and prevents contamination. 

STEP 4: Collect exactly 10 µL of blood

The blood will fill the pipette automatically by capillary action. 

Important: Ensure the blood sample is collected properly.

​

Important

Make sure you have collected exactly 10 µL of blood.

STEP 5: Insert blood collector into tube

Insert blood collector into buffer solution tube and close firmly.

STEP 6: Mix the blood with the buffer

Shake 5–10 times to ensure proper mixing.

Important 

Make sure the blood and buffer are well mixed.

STEP 7: Prepare the test cassette

Add 3 drops of the mixed sample into the test cassette

​

STEP 8: Start using the device

Turn on the device using the power button located underneath.

Once the device is on, press “New Measurement” and enter the required data to begin the test.

STEP 9: Insert the test cassette into the reader

Insert the test cassette into the reader — the measurement will start automatically.

STEP 10: Wait 15 minutes

STEP 11: Result is ready

When the timer ends, your result will be displayed on the screen.

​

Scan QR for quick results on your phone in PDF form

Or print the result with a mini printer