Zum Inhalt springen

How to perform test

 CRP | Lansionbio 


*Text instructions will be provided below.



All you nee​d:

  • 1x CRP Test Cassette
  • 1x 10 µL Fixed-Volume Capillary Pipette
  • 1x Sterile Lancet
  • 1x Alcohol Swab
  • 1x Buffer Solution Tube
  • 1x Igloo Reader
  • 1x Lansionbio Adapter

 STEP 1: Prepare and Disinfect the Sampling Area

Lay out all kit components. Disinfect the fingertip with the alcohol swab and let it dry.

 STEP 2: Perform a Fingerstick

Use the sterile lancet to puncture the side of the fingertip. Gently massage the finger to form a blood drop.

​

STEP 3: Remove the first droplet of blood

Wipe away the first drop of blood with a clean tissue or sterile gauze before collecting the sample. This ensures accuracy and prevents contamination. 

STEP 3: Collect Exactly 5 µL of Blood

The blood will fill the pipette automatically by capillary action. 

Important: Ensure the blood sample is collected properly.

​

Important

Handle the pipette gently. Use only the top part when drawing up or releasing liquid.

Hold the upper part of the pipette and avoid squeezing too hard to ensure accurate volume and prevent air bubbles.

 

STEP 5: Transfer Blood into Buffer

Gently press only the top of the pipette to release the entire blood sample into the buffer tube for proper mixing.

STEP 6: Mix the blood with the buffer

Shake 5–10 times to ensure proper mixing.

STEP 7: Collect the mixed blood and buffer solution

Gently press the top of the pipette to collect the mixed blood and buffer up to the indicated mark.

STEP 8: Prepare the test cassette

Transfer the full volume from the pipette into the test cassette.

​

STEP 9: Start using the device

Turn on the device using the power button located underneath.

Once the device is on, press “New Measurement” and enter the required data to begin the test.

STEP 10: Insert the test cassette halfway into the reader

Insert the test cassette halfway into the reader to enable QR code scanning. Wait until the reader completes the scan and the green indicator light turns on.

STEP 11: Insert the test cassette fully

Once the indicator light turns green, insert the test cassette completely to start the measurement.

​

STEP 12: Wait 3 minutes

​

Scan QR for quick results on your phone in PDF form

 

Or print the result with a mini printer 


Result is ready


DISPOSAL:

  • Dispose of used cassettes, pipettes, and lancets as biohazardous waste.
  • Do not reuse any test components.
  • Reader and adapter are reusable; clean according to the official maintenance guide.